Hamilton Beach OG02 Manual De Montaje Y Operacion página 24

Idiomas disponibles

ASSEMBLY STEPS

STEP 11" Side Burner

12. The side burner is now fully assembled.

This step (step 12) is only necessary if you find later

that you cannot light the side burner by using the side burner knob. Often, this is caused by

poor alignment

of the igniter tip with a hole in the side burner. To adjust this alignment,

grab

the igniter tip with a pair of needlenose

pliers as shown in Fig. 11p, Using gentle force,

move the position of the tip so it is about 1/8" from the bottom of one of the holes in the

burner, as shown in Fig. 11q.

Fig. 11p

Fig. 1 lq