Selco WF 110 Instrucciones De Uso página 42

4 Program cancellation
Select the required program by rotating the encoder.
Delete the selected program by pressing button (3)
.
Confirm the operation by pressing button (3)
Cancel the operation by pressing button (4)
3.11 Interface personalisation
Allows the parameters on the main screen and in the quick
choice menu to be personalised.
1 Main screen personalisation
Select the parameter that you wish to replace by press-
ing the encoder button.
Enter the quick choice menu by pressing button (1)
Select the required parameter by rotating the encoder
until it is brought within the central quadrant (2).
The value and the unit of measurement of the selected
parameter are shown alongside (3).
Store the selected parameter on the main screen by
pressing button (4)
42
.
.
.
.
2 Quick choice menu personalisation
Enter set-up by pressing the encoder button for at least
2 seconds.
Select the required parameter by rotating the encoder
until it is displayed within the central quadrant (5).
Store the parameter selected in the quick choice menu
by pressing button (1)
Cancel the selected parameter from the quick choice
menu by pressing button (1)
Save and exit the current screen by pressing button (4)
.
3 7 segment display personalisation
Enter set-up by pressing the encoder button for at least
2 seconds.
Select the required parameter by rotating the encoder
until it is displayed within the central quadrant (5).
Store the selected parameter in the 7 segment display
by pressing button (3)
Save and exit the current screen by pressing button (4)
.
PROCESS 7 SEGMENT DISPLAY
MMA
ARC AIR
TIG
MIG/MAG
Pulsed MIG/MAG
.
.
.