Idiomas disponibles
Idiomas disponibles
REMOVING
Install the special clamp tool (3 or 4 shanks) and
lock it with the M8 locking knobs.
Rotate the special tool's handle to compress the
cup spring totally
Unscrew now the remaining flywheel locking
screws.
Remove the M8 locking knobs from the special tool, then the special tool and the three legs.
Now the pressure plate is raised and the clutch bell touches the flywheel, becoming easy to
unscrew and remove the clutch.
MOUNTING
Put the plate and the clutch mechanism on the
flywheel.
Centre the disk clutch using one of the suitable
pin supplied.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
