Amplicomms BigTel 1480 Manual De Instrucciones página 53

Using remote access
To access your answering machine from a remote touch-tone
phone, you must enter the remote access PIN.
1. Dial your telephone number.
2. When switched off, the answering machine takes the call
after approx. 16 ring signals in "Answer only" mode.
Press the star key during the announcement to initiate the
remote access and enter the four-digit remote access PIN of
your telephone. You then have the following options.
- or -
When switched on, the answering machine takes the call
after the set numbers of rings.
Press the star key during the announcement to initiate the
remote access and enter the four-digit remote access PIN of
your telephone. You then have the following options:
- key 5 - start playback
- key 7 - turn on the answering machine
- key 9 - turn off the answering machine
While a message is playing:
- key 2 - delete current message
- key 4 - repeat current message. Press key 4 twice to skip
back to the previous message.
- key 6 - skip to the next message
- key 8 - stop the current message playback.
Note: The connection will be cut off after three incorrect PIN
entries.
Helpline 0844 800 6503 (See page 52 for costs and hours of operation)
51