Idiomas disponibles
Idiomas disponibles
3.1. Display messages
AUTO CHECK
NO NAME
MODE:NORMAL
02/01/20
LOW CURRENT
OVERRANGE
OVERHEATING
When turning the equipment on using the
On/Off switch, this introduction message
appears for a while.
The equipment is carrying out some
functional verifications.
Main screen where a test can be started,
01:15
or set a new one.
I= 55A
16:18
Indicates that the test current is not
enough to carry out the reading.
I=0.0A
01:15
Indicates that the measured resistance is
higher than the maximum value readable.
I=0.0A
01:15
Indicates that some part of the equipment
has achieved the critical temperature.
Thus the system will cut the high current
generation.
11
R
