Tabla de contenido
Idiomas disponibles
Idiomas disponibles
...................................................................... 2
PRODUCT SPECIFICATIONS ........................................... 2
KNOW YOUR COMPOUND MITER SAW ........................... 5
.............................................................. 6
DOUBLE INSULATION .................................................. 10
ELECTRICAL CONNECTION .......................................... 10
POLARIZED PLUGS ...................................................... 10
EXTENSION CORDS .................................................... 10
................................................................. 11
REMOVING CONTENTS FROM PACKING ........................ 11
PACKAGED CONTENTS LIST ........................................ 11
.................................................................... 12
TOOLS NEEDED .......................................................... 12
WORK CLAMP ............................................................. 13
DUST BAG .................................................................. 13
DUST PORT ATTACHMENT ........................................... 13
INSTALL/REMOVE THE BLADE ..................................... 14
INSTALLING WORKPIECE SUPPORT EXTENSIONS ......... 15
............................................................ 15
BEVEL ALIGNMENT ..................................................... 15
MITER ALIGNMENT ..................................................... 16
DEPTH STOP ADJUSTMENT ......................................... 17
FENCE EXTENSION ..................................................... 17
BEVEL LOCK TENSION ADJUSTMENT ........................... 17
NOTE: The manual cover illustrates the current production model. All other illustrations contained in the manual are representative
only and may not be exact depictions of the actual labeling or accessories included. They are intended for illustrative purposes only.
PRODUCT SPECIFICATIONS
Cutting Capacity
0° Miter/0° L/R Bevel: 2 inch x 14 inch
(Extended Capacity 2 x 18 inch)
(Maximum nominal
lumber sizes)
45° Miter/0° L/R Bevel: 2 inch x 10 inch
0° Miter/45° L/R Bevel: 2 inch x 14 inch
45° Miter/45° L/R Bevel: 2 inch x 10 inch
Baseboard (Vertical)
6.5 inch
Crown (Vertically
7.5 inch
Nested)
Net Weight
57 lbs
Input
120 V~, 60hz, 15 Amps
Blade Arbor Hole
1 inch (with 5/8 inch reducing spacer)
Blade Diameter
12 inch
No Load Speed
4,000 r/min (RPM)
Blade Max Speed
5,500 r/min (RPM)
Rating
Number of Teeth
60
Blade Thickness
0.07 inch (1.8mm)
Blade Kerf
0.1 inch (2.6mm)
TABLE OF CONTENTS
...................... 6
......... 7
............ 8
..................................... 9
............................................. 10
FEATURES
SLIDE RESISTANCE ..................................................... 18
MITER LOCK ADJUSTMENT .......................................... 18
THROAT PLATE ........................................................... 19
PREPARATIONS FOR TRANSPORTATION ....................... 20
MOUNTING SAW TO STABLE SURFACE ......................... 21
................................................................. 22
CUTTING WARPED MATERIAL ...................................... 22
CLAMPING WIDE WORKPIECES ................................... 23
SUPPORTING LONG WORKPIECES ............................... 23
POWER SWITCH LOCK ................................................ 24
SHADOW LINE ............................................................ 24
NON-SLIDING CUTS .................................................... 25
FOR MITER CUTS ........................................................ 25
FOR BEVEL CUTS ........................................................ 26
FOR COMPOUND MITER CUTS ..................................... 26
SLIDE CUTS ................................................................ 27
TIPS FOR CUTTING CROWN MOLDING ......................... 28
AUXILIARY FENCE ....................................................... 29
EXPAND WORKTABLE AREA ......................................... 30
............................................................ 31
KEEP MACHINE CLEAN ................................................ 31
GENERAL MAINTENANCE............................................. 31
BRUSH REPLACEMENT ................................................ 31
LUBRICATION ............................................................. 31
................................................. 31
FAILURE TO START ..................................................... 31
............................................................. 32
PARTS, SERVICES OR WARRANTY ASSISTANCE
BLADE DESCRIPTIONS
APPLICATION
Construction Saw Blades
(thin kerf with anti-stick rim)
General Purpose
Fine Crosscuts
Woodworking Saw Blades
(provide smooth, clean cuts)
Fine Crosscuts
NOTE: ONLY use blades that are marked for speeds
of 4,000 r/min (RPM) or higher. A 12 inch Blade is the
required blade size for the Saw. Larger blades will come
into contact with the Blade Guards and smaller blades will
not be adequately guarded. Use crosscut blades only. DO
NOT use blades designed for ripping, combination blades
or blades with hook angles in excess of 7°.
2
..................... 20
.. 33
DIAMETER
TEETH
12 inch (305mm)
40
12 inch (305mm)
60
12 inch (305mm)
80
Capítulos
Tabla de contenido
Solución de problemas
