Lanaform S1 Manual página 3

Ocultar thumbs Ver también para S1:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13
∙ Do not fold the power cable and do not use the
heating underblanket when it is creased, rolled
up or folded. ∙ Never use this device in a room
where aerosols (sprays) are used or in a room
or where oxygen is being administered. ∙ To dis-
connect the device, turn the button to the «OFF»
position, then remove the plug from the mains.
∙ Do not use safety pins, do not scratch the heat-
ing underblanket with a sharp object and do not
beat it with a blunt object. Do not attach the
device with pins or other metal objects. Never
let anything drop or insert any object into any
openings. ∙ Do not expose your heating under-
blanket to the sun and do not iron it. This will
prevent damage to the insulation of the elec-
trical circuit. ∙ This device is not intended to be
used in a hospital environment, but for use in
the home only. ∙ Do not use the heating under-
blanket with other heating devices or to heat
other devices (hot-water bottle, electric blanket,
etc.). ∙ If you are concerned about your health,
consult a doctor before using this appliance. ∙ If
you experience any pain when using this device,
stop using it immediately and consult your doc-
tor. ∙ Never use this device on a body part that is
swollen or inflamed or if you have a skin rash.
∙ The control must remain within reach, do not
leave the switch hidden under a pillow or any
other object. ∙ Do not wash the heating under-
blanket too often to avoid excessive wear and
tear. The heating underblanket should not be
washed in the washing machine more than
5 times during its life. ∙ Do not use the device
when it is damp and do not turn it on to dry it.
∙ When storing your heating underblanket for
a long period, store it in a dry place. Carefully
E-IM-HeatingBlanketS1-005.indd 3
E-IM-HeatingBlanketS1-005.indd 3
EN
FR NL DE ES IT PL CS SK HU SL HR BG SV
check its condition before operating it again for
the first time. If the power cable appears dam-
aged, do not operate the device and take it back
to the supplier or its after-sales department. ∙
This device should not be used by young chil-
dren, people who are insensitive to heat or on
animals. ∙ The device should not be used on a
folding bed or on a bed, a section of which can
be adjusted. ∙ Examine the device frequently
to check for any signs of damage to the prod-
uct or signs of wear. If you notice signs of wear
or damage, stop using this product immedi-
ately and take it back to the supplier or the af-
ter-sale service.
USING THE HEATING UNDERBLANKET
Diagram and description:
(Fig. 1)
1
OFF button
2
Position "1" (1st setting)
3
Position "2" (2nd setting)
4
Position "3" (3rd setting)
5
Display screen
OPERATING THE HEATING UNDERBLANKET:
Put the underblanket down flat on the bed. The light side of the heat-
ing underblanket should be against the mattress. The end of the under-
blanket without the controller should be placed at the foot of the bed.
Only put a sheet or fine cotton mattress over the underblanket so
that you can feel the heat.
Connect the plug to the socket on the side of the underblanket and
the other end to an electricity supply (AC220-240V). Make sure that
there is a power socket nearby and that the power cable is not in a po-
sition where the user may trip over it.
To pre-heat the underblanket, select the third setting for 15 minutes.
The temperature will gradually rise.
After pre-heating, get on to your heating underblanket and turn the
control button to the heat setting you require. If you use the under-
blanket for a long time or if you're going to sleep, select the first set-
ting. It will take about 15 minutes for the underblanket to reach the
required temperature.
To turn the device off, turn the button to the "Off" position.
Note: The heating underblanket is set to run continuously for three
hours. If you wish to extend that time, it is advisable to let the heat-
ing underblanket cool down first for 5 minutes before using it again.
3
03-04-23 10:36:01
03-04-23 10:36:01
loading