Mounting The Loop Handle - Stihl FC 56 C Manual De Instrucciones

operator. This ensures that cuttings and
other debris are directed away from the
power tool and operator.
Edging
Start the engine
N
Start the cut at no less than half
N
throttle and continue cutting at full
throttle.
Hold and guide your power tool so
N
that the blade is vertical.
Cut steadily so that the engine is not
N
lugged down – do not apply force.
Operate at no more than a normal
N
walking pace.
Do not push the blade into the
N
ground.
FC 56 C
Always walk forwards when cutting,
N
do not pull the unit towards you.
Cut at a steady pace to avoid having
N
to make several passes.
1
Use the gunning sight (1) to line the
N
blade up with the edge of the bed.

Mounting the Loop Handle

Your new power tool comes with the
loop handle mounted on the drive tube,
but it must be turned and lined up to suit
your requirements.
Adjusting loop handle with star knob
screw
1
Loosen the star knob screw (1).
N
Turn the handle to the vertical
N
position.
English
15