Replacing The Depth Wheel; Replacing The Skirt - Stihl FC 56 C Manual De Instrucciones

English

Replacing the Depth Wheel

Have a worn depth wheel replaced by a
servicing dealer. STIHL recommends
that you have servicing and repair work
carried out exclusively by an authorized
STIHL servicing dealer.
Depth Wheel
2
The end of the thread on the
N
screw (1) is peened over to ensure
that the wingnut (2) does not work
loose and be lost.
A very high torque has to be applied to
remove the wingnut from the screw. If
the parts are then reassembled, the
captive function is no longer
guaranteed. In such a case have the
screw and wingnut replaced by a
servicing dealer.
26

Replacing the Skirt

Removing the skirt
1
Undo and remove the screw (1).
N
Remove the washer (2)
N
Pull the skirt (3) out of the
N
segment (6) and out of the gap (5) in
the deflector
5
4
1
2
6
3
Fitting the skirt
1 2
6
3
In order to push the skirt easily into
N
the gap on the deflector, apply a thin
coating of resin-free oil to the top of
the skirt
Thread the skirt (3) into the
N
segment (6) and push into the
gap (5) of the deflector – the bore in
the skirt must be fixed in the
arbor (4)
Place washer (2) onto screw (1).
N
Insert and tighten the screw (1)
N
5
4
FC 56 C