Idiomas disponibles
Idiomas disponibles
4. If the washer is not level, move the washer out slightly, tip
back, prop up the front of the washer with the wood block
and adjust the feet up or down as necessary by twisting the
foot. Turn the foot clockwise to raise the washer or
counterclockwise
to lower the washer. Repeat steps
1 through 4 until washer is level.
5. After the washer is in the final location and level, use a %6" or
14 mm open-end wrench to turn the nuts counterclockwise
on the feet tightly against the washer cabinet.
IMPORTANT:
If the nuts are not tight against the washer
cabinet, the washer may vibrate.
1. Check the electrical requirements.
Be sure that you have the
correct electrical supply and the recommended
grounding
method. See "Electrical Requirements."
2. Check to be sure all parts are now installed. If there is an
extra part, go back through the steps to see which step was
skipped.
3. Check to be sure you have all of your tools.
4. Check to be sure that the yellow shipping strap was removed
from the back of the washer and used to secure the drain
hose.
5. Dispose of/recycle all packaging materials.
6. Check to be sure the water faucets are on.
7. Check for leaks around faucets and inlet hoses.
Electrica_ Shock Hazard
Pmuginto a grounded
3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension
cord.
Failure to follow these instructions
can resumt in death,
fire, or eiectricam shock.
8. Plug into a grounded 3 prong outlet.
9. Remove the protective film on the console and any tape
remaining on the washer.
10. Read "Washer Use."
11. To test your washer, measure 1/2 of the normal recommended
amount of powdered or liquid detergent and pour it into the
washer basket or detergent dispenser (on some models).
Close the lid. Select any cycle, and then pull cycle control
knob to start the machine. Allow it to complete one whole
cycle.
FEATURES AND BENEFITS
Your new washer has many special features that contribute to
proper cleaning and fabric care. Here are descriptions
of the
features and their benefits:
TOTAL CARE
TM
Agitator
The TOTAL CARE
TM
Agitator moves in three directions to ensure
proper cleaning. At the bottom of your washer the agitator vanes
move back and forth to flex the fabric, loosening the soil. The
upper portion of the agitator has vanes that push the clothes
down in a spiraling pattern to the area of best cleaning action. A
"reliever" motion displaces the clothes already at the bottom. For
your largest loads, the TOTAL CARE
TM
Agitator responds with a
vertical motion that senses the "large load" and guides items to
the bottom.
KING SIZE
TM
Capacity
Your washer can handle full-sized loads of heavy work clothes,
towels, or mixed items. Loads with only a few items can have a
lower water level setting and they need less wash time.
QUIET PAK
TM
II System
The QUIET PAK
TM
II System is designed to reduce water sounds
and ringing noises. The cabinet is insulated with sound-damping
materials.
TRIPLE SMART
TM
Dispensers
The Triple Smart
TM
dispenser ensures that detergent, bleach, and
fabric softener are introduced
into the washer at the proper time
and are properly diluted. The dispenser makes your washer truly
automatic by making it unnecessary for you to return to the
washer during the cycle to put in detergent, bleach, or fabric
softener.
Ultra Rinse System
The Ultra Rinse System delivers a rinsing spray at the end of the
wash cycle to provide additional soil and soap removal.
Hot Prewash
This cycle uses wash water from the hot inlet faucet only to help
loosen heavy soils and stains that would normally benefit from
the use of hot water.
Wash/Spin
Speeds
Six combinations
of speeds are provided for wash action (of
agitator) and spin motion (of basket). A Speeds selector control
knob lets you select a wash/spin speed for different types of
fabrics and soil levels.
Water Level and Temperature
A Water Level control gives you the flexibility to save water when
washing small loads. Another control knob lets you select a wash
and rinse water temperature setting based on the type of load
you are washing. Your washer also has an Automatic
Temperature Control (ATC). ATC electronically
senses and
maintains a set water temperature
in the washtub by alternating
between incoming hot and cold water. The Hot and Warm setting
on this washer will be cooler than you are accustomed
to. Wash
temperatures
in this Energy Star washer are lower than the
temperatures you may be used to in conventional washers.
Heated water consumes the largest amount of energy that a
washer uses. Today's detergents work well at temperatures
above 60°F (15.6°C).
!!!!!!!!!!!!!!!!!!!!!!!!!
11
