GE 22 Manual Del Usuario E Instrucciones De Instalación página 24

Before youcall for service...
Troubleshooting tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Possible Causes What To Do
RefrigeraW_doi Refrigerator in defrost cycle. * Wait about 40 minutes for defrost cycle to end.
opera_ TheRefrigeratortheThe 0c°ntr°ls fuse (Off)position.is blown/circuit is are unplugged, set to •••ReplacePushtemperatureMove the the fuse plug refi'igerator setting, or completely reset and the into fi'eezer breaker, the control outlet, to a
.... breaker is tripped.
Rollers need adjusting. • See Rollers.
Normal when refrigerator • Wait 12-24 hours for tile refrigerator to completely
is first plugged in. cool down.
Often occurs when large • This is normal.
amounts of food are
placed in ref "l_emtor.
Door left open. • Check to see if package is holding door open.
Hot weather or frequent • This is normal.
door openings.
Temperature controls • See About the controls.
set at the coldest
settiug.
Refrigerato_eze_ Temperature control not set • See About the controls.
cold enough.
Warm weather or frequent • Set the temperature control one step coldm:
door openings. See About the controls.
Door left open. • Check to see if package is holding door open.
• Check to see if package is holding door open. Door left open.
Too frequent or too long
door openings.
Icemaker power switch • Set the power switch to the I (on) position.
is in the 0 (Off)position.
Water supply turned off or • See Installing the water line.
not connected.
Freezer comparmaent • Wait 12-24 hours for the refrigerator to completely
too warm. cool down.
Piled up cubes in the storage • Level cubes by hand.
bin cause the icemaker
to shut off.
Ice cubes stuck in icemaker. • Turn off the icemakm; remove cubes and turn the
(Green power light on icemaker back on.
icemaker blinking.)
Ieemaker power switch is in the
I/0n)position, but the water supply
to the refrigerator has not been
connected.
• Set the power switch m the 0 (Off) position. Keeping it
in the I(on)posidon will damage the water valve.
24