Idiomas disponibles
Idiomas disponibles
English
112
Dust guide
113
Mounting position of the sub fence (A)
114
Mounting position of the sub fence (B)
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
C3612DRA:
Cordless Slide Compound Miter Saw
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools that
have reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling facility.
Direct current
V
Rated voltage
n
0
No-load speed
Switching ON
0
Switching OFF
Disconnect the battery
Always wear eye protection.
Always wear hearing protection.
Do not stare at operating lamp.
Warning
Battery
Lights ;
The battery remaining power is over 75%.
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%.
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
STANDARD ACCESSORIES
○ 305 mm TCT Saw blade
(mounted on tool)......................................................... 1
○ Dust bag....................................................................... 1
○ 8 mm hex. bar wrench.................................................. 1
○ Vise Assembly ............................................................. 1
○ Holder .......................................................................... 1
○ Sub Fence (mounted on tool)....................................... 1
○ Holders ........................................................................ 2
○ Sub table assembly...................................................... 2
○ Battery (BSL36B18X) .......................... (WCZ):1, (NN):0
○ Battery Charger (UC18YSL3) .............. (WCZ):1, (NN):0
○ Battery cover (Code No. 329897) ........ (WCZ):1, (NN):0
Standard accessories are subject to change without notice.
APPLICATIONS
Cutting various types of aluminium sash and wood.
SPECIFICATIONS
1. Power tool
Model
Voltage
No-load speed
Saw Blade Dimensions (oD × iD ×
Thickness)
Maximum kerf
Miter Cutting Angle
Bevel Cutting Angle
Compound Cutting
Angle
LED light
18
C3612DRA
36 V
4000 min-
(Auto Switch mode) /
3200 min-
(High Torque mode)
305 mm × 30 mm ×
2.1 mm
2.8 mm
Right 0°–57°,
Left 0° – 45°
Right 0°–45°,
Left 0°–45°
Bevel (Left)
Miter (Left) 0°–45°,
0°–45°
(Right) 0°–45°
Bevel (Right)
Miter (Right) 0°–45°,
0°–45°
(Left) 0°–45°
Yes
1
1
