Sharp SMO1752JS Manual De Installación E Instrucciones Para El Uso página 5

Idiomas disponibles

Idiomas disponibles

TOOLS YOU WILL NEED
# Phillips screwdriver
2
Tin snips (for cutting
damper, if required)
Gloves
Safety goggles
MOUNTING SPACE
"
13 Maximum (33 cm)
"
30
(76.2 cm)
69 (1.5 m)
or more
from the floor
to the top of
the Microwave
Installation Instructions
Pencil
Scissors
(to cut template, if necessary)
Saw (saber, hole or keyhole)
Bottom Edge of
Cabinet Needs to
be 30 (76.2 cm)
or More from the
Cooking Surface
"
30
(76.2 cm)
min.
Backsplash
Ruler or tape measure and
straight edge
"
"
Electric drill with
3
,
1
and
5
16
2
8
drill bits
Stud finder or
Hammer (optional)
Level
NOTES:
The space between the cabinets must be
30" (76.2 cm)wide and free of obstructions.
If you are going to vent your microwave oven
to the outside, see Hood Exhaust Section for
exhaust duct preparation.
When installing the microwave oven beneath
smooth, flat cabinets, be careful to follow the
instructions on the top cabinet template for
power cord clearance.
As a guide to installation, see page 25 for Mounting
Template Information.
If the cabinet depth including the cabinet doors
is more th n 13' " " ' th n the unit must be spaced
a
out from wall using adequate materials supporting
150 Ibs to allow proper top vent air exhaust/intake.
EN-5
Carpenter square
(optional)
"
Filler blocks or scrap
wood pieces, if needed
for top cabinet spacing
(used on recessed bottom
cabinet installations only)
Duct and masking tape
e
loading