Idiomas disponibles
Idiomas disponibles
1,
2.
iii::::_,_i:ii_!_2i=_!_!_!_:::i_iii_ii
_!i:iii!
i o_ii ¸¸¸¸ ii_::_i:_!!i!!_sii;iiii_;?l_i;it:i_
_!iljlili
}
To pause the washer at any time, select STOR
To continue the cycle, select and hold START (for
approximately
1 second).
Not all Options and Modifiers are available with all Cycles.
Cycles, Options and Modifiers can be changed anytime before
START is selected.
To stop a cycle and select a new cycle
1. Select STOP once.
2. Select desired cycle.
3. Select the desired OPTIONS and MODIFIERS.
4. Select and hold START (for approximately
I second) to restart
the washer at the beginning of the new cycle.
To cancel a cycle
1. Select STOP twice.
2. The washer powers down, the door unlocks, and clothes can
be removed.
NOTE: If the water level or the temperature
is too high, the
washer will drain automatically
before the door unlocks.
To change Options or Modifiers
after the cycle has
started
1. Select STOP.
2. Select the desired OPTIONS or MODIFIERS. If the option or
modifier are not available, the machine will beep.
3. Select and hold START (for approximately
1 second) to
continue the cycle.
To drain the washer
manually
1. Select STOP.
2. Select DRAIN & SPIN.
3. Select and hold START (for approximately
1 second) to begin
the drain.
4. When the spin is complete, the door unlocks. Items can be
removed from the washer.
These lights show which portion of the cycle the washer is
operating. They also indicate when you can add an additional
item to the wash cycle and when the controls are locked.
STATUS
Add a Garment O
Wash l
Rinse
Spin
Clothes Clean
Controls Locked O
DoorLocked(_
You can add items to the washer after the wash cycle has
started, if the ADD A GARMENT status light is illuminating. All
cycles have this feature except Rinse/Spin
and Drain/Spin.
To add items
1. Select STOR The washer door unlocks, and items can be
added.
2. To continue the cycle, close the door and select and hold
START (for approximately
1 second).
3. To unlock the door after the Add a Garment period, press
STOP twice. This will cancel the Wash Cycle.
Clothes Clean
The Clothes Clean light comes on when the cycle is complete.
Light will stay on until door is opened.
Locking controls
The Control Lock prevents unintended use of the washer. You
can also use the control lock feature to prevent unintended
cycle
or option changes during a cycle. When CONTROL LOCKED is
lit, all buttons are disabled except for STOP and POWER. You
can lock the controls while the washer is operating.
To lock the controls
Select and hold CYCLE SIGNAL for 3 seconds.
The CONTROL LOCKED status light illuminates.
To unlock the controls
Select and hold CYCLE SIGNAL for 3 seconds until the
CONTROL LOCKED Status light turns off.
Expected
Cycle Time
The cycle times vary automatically based on your water pressure,
water temperature,
detergent, and clothes load. The cycle time
will be extended if oversudsing occurs or the load is unbalanced.
The suds reduction routine removes extra suds and assures
proper rinsing of your garments. The options you select will also
affect the cycle times that are shown in the Preset Cycle Settings
table.
Door Locked
When the status light illuminates, the door is locked.
Wash Cycles
Choose Wash Cycles by rotating the Cycles selector knob to the
desired cycle. The indicator light for the cycle selected will
illuminate. Each cycle is designed for different types of fabric and
soil levels.
Express Wash
Delicates
HeavyDu_
Whitest
Whites
15
