Idiomas disponibles
Idiomas disponibles
MINUTES
[ + ] and [ - ]: to set the minutes
[OK]: allows to proceed with selecting
the time display format
[CONFIG.]: exit configuration mode
TO DISABLE RE-MEMORISATION
[ + ] and [ - ]: move to enablement of
memorisation of the set configura-
tion/programme
[OK]:
allows
to
return
Italian/English selection
[CONFIG.]: exit configuration mode
PROGRAMMING
The key [PROG.] gives access to the settings of the time bands of the remote control programmes. The flashing part of the display is in grey
WINTER-BETWEEN SEASON PROGRAMME
[ + ] and [ - ]: programme selection
[Copy]: selection of programme to be
copied
[Paste]: the copy of the selected pro-
gramme is pasted onto the current pro-
gramme
[OK]: allows to proceed with selecting
the day
[PROG.]: exit programming mode
"0-24" TIME FORMAT
[ + ] and [ - ]: selection of the "AM-PM"
time display format
[OK]: allows to proceed with memorising
the settings
[CONFIG.]: exit configuration mode
TO ENABLE RE-MEMORISATION
[ + ] and [ - ]: move to disablement of memorisation of the set
configuration/programme
[reset]: resetting to manufacturer's settings (use a ball-point
pen to press the [reset] key located on the front part of the com-
to
the
mand)
[OK]: allows to return to the Italian/English selection
[CONFIG.]: exit configuration mode
DAY/HALF HOUR
[ M ]: selection of the day
[ + ] and [ - ]: selection of the "half hour"
[ S ]: variation of min. levels and T1,T2,T3
[Copy]: selection of day to be copied
[Paste]: the copy of the day selected or the
copy of the set is pasted onto the following
half hour
[OK]: allows for modification of the tempera-
ture values assigned to a level (set)
[PROG.]: exit programming mode
"AM-PM" TIME FORMAT
[ + ] and [ - ]: selection of the "0-24" time
display format
[OK]: allows to proceed with memorising
the settings
[CONFIG.]: exit configuration mode
CHANGE TEMPERATURE LEVELS
[ + ] and [ - ]: increase/decrease of the
temperature value of the level that is fla-
shing
[ S ]: move on to next level
[OK]: allows to proceed with selecting
the programme
[PROG.]: exit programming mode
83
