Idiomas disponibles
Idiomas disponibles
Welcome
Before you use your charging system for the first time,
familiarise yourself with it and read these operating
instructions carefully.
Also observe the Owner's Manual for your vehicle.
Mercedes-Benz continuously develops its products
further.
Mercedes-Benz therefore reserves the right to
introduce changes to the following:
•
Design
•
Equipment
•
Technical features
Validity
For information on whether these operating
instructions are valid for your vehicle model, please
consult your Mercedes-Benz Service Centre.
Correct use
Only use this charging system to charge
Mercedes-Benz electric vehicles.
Only use the charging system as described in these
operating instructions.
Only use the original adapter included.
Any other usage is incorrect and may result in damage
to property or personal injury.
In the event of incorrect use, Mercedes-Benz will not
accept any liability for damage that may occur and the
warranty for the device will be rendered invalid.
Scope of delivery*
Country-specific deviations are possible.
1 Charging system
2 Adapter for household sockets
3 Adapter for three-phase current
4 Adapter for charging station/wallbox
5 Wall bracket with key**
6 Case
*Different scopes of delivery are offered for different
sales channels.
**Also available from Mercedes-Benz dealerships
Symbols
Read the operating instructions
thoroughly to familiarise yourself with
the product.
Warning notices draw your attention
to hazards that may endanger your
health or your life, or the health or life
of others.
Risk of electric shock if used
incorrectly.
With the CE label, the entity placing
the product on the market declares
that the product complies with all
applicable European
regulations/standards.
With the UKCA label, the entity placing
the product on the market declares
that the product complies with all of
the applicable regulations/standards
of the United Kingdom.
The vehicle plug on this device
complies with the EN 62196-2
standard.
Type of power supply: AC
Design: Type 2
Voltage range: 480 V RMS
An adapter bearing this symbol
complies with the EN 62196-2
standard.
Type of power supply: AC
Design: Type 2
Voltage range: 480 V RMS
This symbol indicates compliance with
the EU Directives on the restricted use
of certain hazardous materials in
electrical and electronic devices.
- 15 -
