Parkside PLSA 40-Li C2 Traduccion Del Manual De Instrucciones Originale página 30

GB MT
Overview
1 Motor housing
2 Handle
3 Volume control
3.1 Turbo button
4 On/Off switch
5 Rechargeable battery
5.1 Release button
6 Charger
7 Protective cover, suction aperture
7.1 Marking, protective cover for
suction aperture
7.2 Marking, motor housing
8 Locking button for suction
aperture
9 Blowpipe (three-part)
10 Locking button for blowing
aperture
11 Additional handle
12 Fastening eyelets for carrying
strap
13 Carrying strap
14 Collection bag carabiner
15 Collection bag
16 Suction pipe (three-part)
17 Angle adjuster for additional
handle
18 Battery charge level indicator
19 Turbo nozzle
20 Collection bag eyelets
21 Ventilation opening of collection
bag
22 Push-fit lock
Technical data
Cordless leaf
blower/vacuum ........ PLSA 40-Li C2
Motor voltage
Current strength .............................. 22 A
Rated power ........................max. 580 W
Rated speed n ......... 6 000 - 19 000 min
30
(DC) (2x 20 V)
40 V
Air speed "Blowing"
operating mode ...............max. 320 km/h
vacuum volume: ................max 576 m³/h
Shredding rate ...................................8:1
Collection bag ................................. 45 l
Protection type................................. IPX0
Weight (without battery)
Blow function .......................... 2,78 kg
Suction function ....................... 3,63 kg
Sound pressure level
(L ) ........................78,1 dB , K
pA
Sound power level (L
guaranteed ...............................100 dB
Blowing operating mode:
L measured = 98,1 dB; K
wa
Suction operating mode:
L measured = 98,4 dB; K
wa
Vibration (a )
h
handle ............... 1,30 m/s
additional handle .1,16 m/s
For use with smart batteries
(Smart PAPS 204 A1/Smart PAPS 208 A1)
Operating frequency/
Frequency band ........2400 - 2483.5 MHz
Max. transmission power .......... ≤ 20 dBm
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated value de-
pending on the manner in which the power
tool is used.
Try to keep the exposure to vibrations as
-1
= 3 dB
pA
)
WA
= 2,0 dB
wa
= 1,98 dB
wa
2 ; K= 1,5 m/s
2 ; K= 1,5 m/s
2
2