Maintenance And Cleaning - Technibel AOV Serie Instrucciones De Uso

5 - USING THE CONTROL BOARD
SWITCH
• This is for selecting the unit's functions.
GB
• Turn the knob to the position the pointer on the required function.
See symbols on diagram :
- Symbol 1 : OFF
- Symbol 2 : Cooling function at low ventilation speed.
- Symbol 3 : Cooling function at medium ventilation speed.
- Symbol 4 : Cooling function at high ventilation speed.
- Symbol 5 : Ventilation function only at low speed.
- Symbol 6 : Ventilation function only at medium speed.
- Symbol 7 : Heating function at low ventilation speed.
- Symbol 8 : Heating function at medium ventilation speed.
THERMOSTAT :
• Set the required temperature by rotating the
thermostat knob. Turn the knob to the blue
area for lower temperatures and to the red
area for higher temperatures.
NOTE :
When the required temperature is reached,
only the ventilation continues to operate.

6 - MAINTENANCE AND CLEANING

IMPORTANT
• For safety reasons : switch off the air conditioner and disconnect from the mains before starting cleaning (see §
1).
• Do not pour water onto the appliance to clean it. This could damage the internal components and cause electrical
discharges.
FRAME AND GRILLE
• Clean the frame and the grille of the appliance with a vacuum cleaner brush or with a soft, clean cloth.
If these parts are dirty, clean them with a clean cloth moistened with a mild liquid detergent.
PRECAUTIONS
• Never use solvents or powerful chemicals. Do not clean with very hot water.
• Some metal edges and the fins on the heat exchanger are sharp and must be handled carefully during cleaning to
prevent injury.
1
0
2
3
4
5
8
SWITCH
8
7
6
THERMOSTAT