Hilti ST 1800 Manual De Instrucciones Original página 14

shown on the rating plate of the tool. The operating voltage of the transformer
or generator must always be within +5 % and -15 % of the rated voltage of
the tool.
Rated power input
Weight
Speed (running under no load)
Max. torque
Chuck
Protection class
Operating temperature
Storage temperature
5 Operation
5.1 Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Unplug the supply cord before making adjustments to the power tool or
before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.
5.1.1 Fitting the scaffold hook
1. Push the scaffold hook onto the tool from the front.
2. Turn scaffold hook into the desired position.
3. Secure the scaffold hook by tightening the knurled thumb screw.
4. Check that the scaffold hook is fitted securely.
5.1.2 Fitting the depth gauge
WARNING
Electrical hazards There is a risk of electric shock if a screw is driven into
a concealed electric cable and, at the same time, the bit holder or depth
gauge is touched.
▶ Hold the product only by the grip when driving or removing screws.
1. Remove the protective sleeve. → page 9
8 English
ST 1800
600 W
1.9 kg
(4.2 lb)
0 /min ...
1,900 /min
22 Nm
(16 ftlb
/ " hex socket
1
4
II
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 70 ℃
(−4 ℉ ... 158 ℉)
378503
*378503*
)
f