Idiomas disponibles
Idiomas disponibles
Electronic Alert & Diagnostic System
(continued)
The Electronic Alert and Diagnostic
System
alerts you when something starts to go wrong
If a system code appears
on the display,
something
needs special attention.
To get your
attention, the display code Flashes until you erase iL
The first 6 flashes are accompanied
by beeps
If more than one coded function
requires
attention
at the same time, the one with the highest priority will be
displayed first
Pressing the SYSTEM CHECK-RESET pad wi!l evaluate all
other coded functions If the NORMAL
display is lit
during the displaying of a code, that function is operating
propedy
Pressing the SYSTEM CHECK-RESET pad will erase
two codes immediately-PF, and CI The dE and
FF codes can only be erased
by touching
the
SYSTEM CHECK-RESET pad after the condition
that caused the code to flash has been corrected.
This flashing
code tells you the
power
to the refrigerator
has
been interrupted
for more than
2 seconds Check the condition
of food in both the fresh food and
freezer corn pa rtments Touch
SYSTEM CHECK-RESET pad to
erase code,,
There is no fault with the refrigerator
when
PF code flashes
This flashing code tells you
something's wrong with the defrost
system- keep doors closed to
retain cold and call for service.
Code flashes unti! problem is
corrected
This flashing code tells you
to check your frozen food.
Has any of it started to thaw?
A package may be holding the
freezer compartment door open
Don't open the door more often
than absolutely necessary whi!e
this code is displayed
Touching
the SYSTEM CHECK-RESET pad after the freezer
compartment temperature has returned to normal will
erase the code
This flashing code tells you to
check the automatic
icemaker.
Ice clumps in the storage bin may
have stalled the icemaker Follow
corrective measures described on
page 8 If water supply to the
icemaker is not connected or not
turned on, make sure manual
icemaker switch isin the STOP position Code stops
Flashing when problem is corrected or SYSTEM CHECK-
RESETpad istouched
