Idiomas disponibles
Idiomas disponibles
EN
30
•
Open the glass plate (1) and take out the metal grease filter (2-3).
•
Mark the four mounting holes from the inside of the cooker hood.
•
Remove the cooker hood again. Drill four 8 mm holes in the wall at the
marked locations and insert the dowels into the holes.
•
Hang the extractor hood on the wall bracket and fasten it to the dowels (4)
with the screws from the inside of the extractor hood.
•
Attach the exhaust air hose to the outlet (5).
Shaft bracket
•
Slide the upper shaft part into the lower one. Pay attention to the position
of the ventilation slots depending on the use for exhaust or recirculation
(see illustration).
•
Attach the shaft bracket to the bottom/outer shaft.
3
4
Upper/inner
shaft part
Lower/outer
shaft part
