Panasonic CQ-C500U Manual De Instrucciones página 12

General
 Up
 Down
Setting Range: 0 to 40
Default: 18
Volume Off (down)
Press [MUTE].
Cancel
Press [MUTE] again.
Note: You can select mute or attenuation. (
The source changes as follows every time [SOURCE]
is pressed.
AUX1 (AUX1 in) (3.5 mm  stereo)
From line output of external sound/audio device (ex.
Silicon-audio player, HDD player, etc.)
Radio
FM1, FM2, FM3, AM (
Player
When loading CD (
When loading MP3/WMA/AAC disc (
AUX1
Device connected to the AUX1 terminal of this unit
12
CQ-C500U
 page 23)
 page 14)
 page 16)
 page 18)
Note: The volume level can be set independently for
each source. (For radio, one volume setting for AM, one
volume setting for all FMs)
Caution
• Set the volume level to low enough before the
AUX connection is completed.
Failure to observe this, the loud noise may come
out and damage your speakers and your hearing.
System-up Connector
When an optional device is connected:
Shift to connected device
When connecting CD changer
When connecting iPod
When connecting XM Receiver
When connecting Sirius Receiver
OR
When an expansion module is connected:
The devices connected to the ports 1 to 4 are
activated in sequence after shifting to AUX2 (device
connected to the AUX terminal of the expansion
module).
Note: For information about connectable devices, refer
to the System Upgrade Guidebook or the instruction
manual for each device.