Idiomas disponibles
Idiomas disponibles
5.2 Upload Data
The function of uploading data only appears under Remote
Cloud Server Mode, which is used for uploading data that is
not synchronized to the cloud server by the local computer.
The specific operation is as follows:
Click the „System „ button, select „Yes" in the upload cloud
server below, then click „Save",
and click „Yes" in the pop up window, as shown below:
EN
Then jump to the interface of uploading, click „Start", wait
for the uploading progress to be completed, click „Exit" and
restart the software to take effect, as shown below:
5.3 Data Query and Processing
Click the „Database" button in the main menu, and you can
see that there are three options in the upper half of the
right function bar: Start Time, Stop Time and Latest. Users
can choose any query mode to find the required data. In
the bottom half of the function bar is the option of data
operation. If you select a data, you can view, delete, import
and export it, as shown below:
5.4 Graphs and Tables
After click „Data View" button, you can see the data graph,
the software provides the function of graph local zoom
in and out, when the data volume is large, simply place
the cursor on required position to view, then scroll the
wheel. The software also provides export function with the
documents and pictures, as shown in the figure below:
Click the „Data Table" option in „Data View" to view the
data in the form of a table. The amount of data displayed
on each page of the table can be changed. That result in
users can view the data flexibly. as shown in the following
figure:
18
Rev. 02.04.2019
5.5 Data Information Statistics
Click the „Data Details" option in „Data View", and you can
see the statistics of the maximum value, minimum value,
average value, record interval and other parameters in this
piece of data, as shown in the figure below:
5.6 Digital Signature
What's a signature? Signature is to mark, the object of
signature is each piece of data, such as this data has
qualified, the user can give this piece of data a signature
with „Qualified", of course, the content of the signature is
completely decided by the user, the specific operation is
as follows:
In the main menu, click the „Database" button, and open
a piece of data what you want from database, click on the
lower left of the „Digital Signature" button, jump to the
interface of digital signature at this time we need to fill in
the login password, and choose ID file for authentication,
and then it also need to select available signature, as shown
in the figure below:
Rev. 02.04.2019
Firstly, the ID file is required. For the software itself, the ID
file is unique and time limited. The specific operation to
obtain the ID file is as follows:
Click the „System „ button in the main menu, select
„FDA21 CFR Part 11 module", Click „FDA Digital Signature
File Management", click „Generate ID File" in the pop up
window, and then name and save the file, as shown below:
Then we need to create the available signature, after select
„FDA21 CFR Part 11 module", click „configure FDA21 CFR
Part 11" button and choose „Signature Manager" in the pop
up window, click on the „New Signature" below, then enter
the signature name and click save to create successfully,
after that, the signature will be displayed in the signature
list, and the user can pick the needed signature, as shown
in the figure below:
At this point, we can use the function, and repeat the
previous operation back to the digital signature interface,
enter the login password and the saved ID file, then click
„Identity Verify", as shown in the figure below:
19
EN
