Idiomas disponibles
Idiomas disponibles
Special features
Smart control
You can connect to the SmartThings app and control your washer remotely.
Connecting your washer
1. Download and open the SmartThings app on your smartphone or tablet (Android & iOS).
2. Tap
to turn on the washer.
3. Tap and hold Smart Control.
a. The washer enters AP mode and connects to your smartphone or tablet.
b. Tap Smart Control to authenticate your washer.
c. Once the authentication process is complete, your washer is successfully connected to the app.
You can use various features available in the SmartThings app.
-
NOTE
• If your washer fails to connect with the SmartThings app, try again.
• Check your router if you experience any Internet connection problem after connecting your washer with
the SmartThings app.
• If the Wi-Fi is off, tap and hold Options for 3 seconds to enter the Settings menu, and select Wi-Fi to turn
it on.
• Turning the washer's Wi-Fi on allows you connect to the washer via SmartThings app on your
smartphone or tablet, regardless of the power status of the washer. However, the washer appears
offline on the SmartThings app if the washer's Wi-Fi is off.
• Close the door before starting the Smart Control function.
• If you use your washer for a while without connecting it to the SmartThings app, a pop-up message
about Smart Control will show for 3 seconds on 20th, 40th, and 60th use.
• If the washer's Wi-Fi is not connected to an AP (access point), the Wi-Fi will turn off when you turn of
the power.
• You can turn on or off the Smart Control function simultaneously for both the washer and the dryer on
the multi-control panel. However, you must complete EasySetup on both appliances in prior.
• If you turn on the Smart Control function on the multi-control panel after you complete EasySetup for
both appliances, Smart Control icons for both appliances appear on display.
Untitled-1 47
English 47
2022-04-11
12:23:47
