Idiomas disponibles
Idiomas disponibles
My Cycles
Add or remove cycles to create a personal cycle list.
1. Tap Options.
2. Turn the Navigation dial to select My Cycles, and then tap OK.
-
You can only edit a cycle to create a personal cycle when the washer is not operating.
3. Turn the Navigation dial to select a desired cycle.
4. Tap OK to add or remove the selected cycle.
Addition and removal of the course is saved automatically.
-
5. Once you finish creating My Cycles, tap Options to return to the cycles screen.
NOTE
• The Normal and Self Clean+ cycles cannot be removed from the cycles list.
• You can also edit My Cycles in the SmartThings app.
Drum Light (Only WF53BB87**A* models)
This turns on the light inside the drum so you can check the status of the items inside.
1. Tap Options.
2. Turn the Navigation dial to select Drum Light, and then tap OK.
Even if the washer is turned off, the drum light will turn on as long as the power cable is connected.
-
Once the Drum Light function is enabled, the drum light will turn off automatically after 2 minutes.
-
-
Opening the washer door automatically turns on the drum light. The light will then turn off
automatically after 2 minutes.
Water droplets on the surface of the drum light can scatter light such that it resembles a yellow
-
stain. This is merely an optical illusion and not a malfunction.
Delay End
You can set the washer to finish your wash automatically at a later time, choosing a delay of between 1 to 24
hours (in 1 hour increments). The hour displayed indicates the time the wash will finish.
1. Select a cycle and change the cycle settings as necessary.
2. Tap Options.
3. Turn the Navigation dial to select Delay End, and then tap OK.
4. Turn the Navigation dial to select the desired time, and then tap OK.
5. Tap and hold
.
Status shows in the display and the washer tumbles the drum to sense the weight of the load (if
-
load sensing is preset for the selected cycle). When load sensing is complete, the display shows the
remaining time until the end of the wash cycle.
To cancel Delay End, tap
-
Untitled-1 43
to restart the washer.
English 43
2022-04-11
12:23:47
