Nailer Operation - Hitachi NP 18DSAL Instrucciones Y Manual De Seguridad

Clavadora de puntas inalámbrica
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

English
(3) Push the nails against the uneven surface of the
magazine and insert the nail tips as far as they will go
into the groove of the magazine.
1 Push into groove
2
Blade Guide Bottom
Magazine
Nail
Bottom of groove
(4) Push the nails in the magazine into the blade guide
with your fi ngers.
(5) Push the magazine cover forward to return it to the
closed position, checking that the nails do not stick
out above the uneven surface of the magazine.
NOTE
● Close the magazine cover gently.
Applying excessive force may result in deformation
of the nail strip, preventing the magazine cover from
closing.
● If the magazine cover is hard to close, check the
groove of the magazine.
Nails sometimes get into the groove. If this happens,
tilt the power tool and remove the nails with a
precision screwdriver or thin bar. In particular, if any
nails get into the hole shown in the cross-section
drawing, remove them through the window in the
back of the magazine.
Each groove of the magazine
The Nailer is now ready to operate.
20
Removing the nails:
(1) Press the stop lever and pull out the magazine cover.
(2) Remove the nails from the blade guide or magazine.
Nail
Uneven Surface
Groove of the
magazine
Gap
NOTE
● If the strip breaks inside the blade guide, nails may be
● Check carefully inside the blade guide, as it will be
● If nails get jammed and cannot be removed, refer to

NAILER OPERATION

Read section titled "SAFETY" (pages 5 – 12).
Stop Lever
Magazine Cover
2 Pull out the nail
1
Blade Guide
left behind when the nails at the front are removed.
hard to see any nails that have been left behind there.
the section "CLEARING A JAM."
DANGER
● Operators
work area MUST wear safety
glasses with side shields
which conforms to ANSI Z87.1
specifi cations.
WARNING
● NEVER point tool at yourself
or others in work area.
● Keep fi ngers AWAY from
trigger when not driving nails
to avoid accidental fi ring.
● Do not use the electrical cord if damaged.
Have it repaired immediately.
Push
1
Pull out
2
Nail
and
others
in
Tabla de contenido
loading

Tabla de contenido