Idiomas disponibles
Idiomas disponibles
EN
HoW To uSE THE NozzLE
Use the special nozzle to reduce
splashing cutting.
Engage the drive nozzle disengaging
the cover waste in the planer. Put
the nozzle on the unit and insert the
pin. Then cover the hole. Attach the
nozzle using the cover screw.
16
16
bLAdE GrINdEr
To get a better job, always keep
the blade sharp. Use the clamp the
blade when the notch is to grind.
First, awaken the two thumbscrews
on the bracket and insert the blade
(A) and (B). Let them touch the
side (C) and (D), and then tighten
the screws.
srew buterfly
blade A
blade C
blade B
Place under water for 2 or 3
minutes. Grind the two blades with
his shaft against the grinder.
mAINTENANCE
before servicing,
NoTE:
disconnect button and mains plug.
rEPLACE THE CArboN
bruSHES
Replace and check the carbon
brushes regularly. When you reach
the limit of use, replace it. Keep the
carbon brushes always clean and
clear.
blade D
Remove the cover of the filler bits
with a screwdriver.
range of use
