Idiomas disponibles
Idiomas disponibles
Lubricating drive shaft
Angle transmission
Troubleshooting table
For spare parts and consumables, please use only genuine parts and designated products and components.
Using parts from other manufacturers or non-designated components may result in a malfunction.
Maintenance and care
Inspect the drive shaft (A) every 100 hours of use and replenish
grease if it is insufficient.
Use the urea based grease.
1.
Remove the plug (A) and drain screw (B) from the angle
transmission (C).
2.
Add grease into the transmission until old grease is pushed
out. If necessary, use a low pressure pump.
Use the urea based grease.
3.
Reinstall the drain screw and plug.
IMPORTANT
23
NOTE
NOTE
