Kenmore 587.14249 Manual Del Usuario página 12

Idiomas disponibles

Idiomas disponibles

Changing Color Panels
mnstalling Reversible
Door and Access Panels
Some models
are equipped
with reversible
door and access panel inserts that offer three decorative
colors,
Electrical Shock Hazard
Tc_prevent electrical shock,
disconnect
electrical
power supply
to dishwasher
before changing
panel,
Cut Hazard
Metal door panels
are sharp
and shouid be handled
with
care. Wear gloves to protect
hands.
Failure to do so can result in
injury.
To change exposed
co!orpane!:"
1. Remove trim strip from one side of the door panel. Loosen but do not remove screws from
trim strip on
remaining
side.
2. Remove trim strip from one side of access panel. Loosen
but
do
not remove screws from trim
strip
on
remaining
side,
3 Slide insert panels out of frame, Position color panel of choice
to outside and replace panel
in frame,
4, Be sure edges of insert panels are under trim strips on opposite
side. Press strips tightly against
panels
before securing
screws, Replace trim strips,
Trim Strips
Loosen all
screws
Loosen all
screws
Enstaiii_g a Wood
Panel Trim Kit
A panel of up to 3/16 " thickness
may be used in
place of the aluminum
insert panels furnished
with your dishwasher,
"You will need a wood
decorator
trim Idt which is availabIe at Sears
Service Center-
Part Nor 5303293778
Note:
Door
springs
will need
to be adjusted
to
balance
weight
of panels,
See the Installation
Instru cti ons,
I2
Insert Door Panel
Loosen all
screws
Door and Access Panel Dimensions
Door' Panel:
17 7/26" x I7 5I_6"
Access Panel:
17 7/16" x 6 1/2"
loading

Este manual también es adecuado para:

587.17245