Idiomas disponibles
Idiomas disponibles
Food Processor
Features
Work Bowl Cover with
Feed Tube
Feedtube accommodates long food items
with a minimum of sectioning. Unlike
extra-wide feed tubes, there is no pusher
interlock system, so the entire length of
the tube can be filled with food.
Food Pusher
Moves food through the feed tube
smoothly and easily.
7-Cup (1.7 L) Work Bowl
The tough polycarbonate
bowl
provides ample capacity for most food
preparation
tasks.
3-Cup (710 ml) Mini Bowl and Mini
Blade (models KFP720 and KFP730)
3-cup (710 ml) bowl and stainless steel
blade are perfect for small chopping and
mixing jobs.
Citrus Press (model
KFP730)
Pressconsists of a Strainer Basket, 2-Piece
Cone, and Lever Arm. Use the removable
outer cone for larger items, such as
grapefruit, and the inner cone
for lemons and limes.
Reversible Slicing/Shredding
Disc
This reversible (2 mm) slicing and (4 mm)
shredding disc is a precision slicing blade
on one side and, when turned over, can
produce uniform shreds of most firm
fruits, vegetables, and cheese.
Disc Stem
Stem fits over the power shaft on the
base and into the bottom of a the
Reversible Slicing/Shredding Disc.
Stainless Steel Multipurpose
Blade
Versatile blade chops, minces, blends,
mixes, and emulsifies in a matter
of seconds.
Heavy-Duty Base
The base features the Off, ON, and Pulse
buttons along with the power shaft,
which rotates the blades and discs.
Spatula/Cleaning
Tool
Special shape facilitates food removal
from bowls, discs, and blades.
Preparing
the Food Processor
for Use
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
Before
First
Use
Before using your Food Processor for the
first time, wash the work bowl, work
bowl cover, mini bowl, feed tube pusher,
discs, and blades either by hand or in
the dishwasher (see "Cleaning the Food
Processor" on page 13).
Work Bowl Assembly
1. Place the Food Processor base on a
dry, level countertop with the controls
facing you. Do not plug in the
Food Proceesor until it is completely
assembled.
2. With the handle just to the left of
center, place the work bowl on the
base, and fit the center opening over
the power shaft.
3. Grasp the work bowl handle and
turn the bowl to the right until it locks
into position.
Continued on next page
