Speaker Setup - Denon AVR-1611 Manual Del Usuario

Speaker Setup

Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup.
• If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to select
MultEQ, Dynamic EQ and Dynamic Volume (vpage 46, 47).
• Manual Setup can be used without changing the settings. Please set if necessary.
Setting items
Amp Assign Normal : Set when using 7.1-channel (Front/Center/Surround/Surround
Set the speakers connected Back/Subwoofer) speakers.
to this unit. ZONE2 : Set for connecting the speakers for ZONE2 to the SURR. BACK/
AMP ASSIGN terminals.
Front Height : Set for connecting the front height speakers to the SURR.
BACK/AMP ASSIGN terminals.
Front Bi-Amp : Set for connecting a tweeter of a front speaker to the
SURR. BACK/AMP ASSIGN terminals and a woofer of the front speaker to
the FRONT terminals.
Front B : Set for connecting the second front speakers to the SURR.
BACK/AMP ASSIGN terminals. In this case, make settings for "Front
Speaker Setup" (vpage 51).
Since "Amp Assign" of this unit is set to "ZONE2" by default, audio is
not output from the surround back speakers. When using the surround
back speakers with MAIN ZONE, change the "Amp Assign" setting to
"Normal".
Speaker Config. Front : Set the front speaker size.
Select speaker configuration • Large : Use a large speaker that can adequately play back low
and size (bass reproduction frequencies.
capability). • Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
NOTE
Do not use the outward
• When "Subwoofer" is set to "No", "Front" is automatically set to
shape of the speaker to
"Large".
determine selection of a
• When "Front" is set to "Small", "Center", "Surround", "Surround
"Large" or "Small" speaker.
Back" and "Front Height" can not be set to "Large".
Instead, use the frequencies
Center : Set the presence and size of the center speaker.
set in "Crossover
• Large : Use a large speaker that can adequately play back low
Frequency" (vpage 50) as
frequencies.
the standard for determining
• Small : Use a small speaker that has inadequate playback capacity for
bass reproduction capability.
low frequencies.
• None : Select when a center speaker is not connected.
"Large" is not displayed when "Front" is set to "Small".
Subwoofer : Set the presence of a subwoofer.
• Yes : Use a subwoofer.
• No : Select when a subwoofer is not connected.
When "Front" is set to "Small", "Subwoofer" is automatically set to
"Yes".
Remote control operation
buttons
Default settings are underlined.
Setting details
Move the cursor
(Up/Down/Left/Right)
Setting items
Speaker Config. Surround : Set the presence and size of the surround speakers.
(Continued) • Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when the surround speakers are not connected.
• When "Surround" is set to "Large", "Surround Back" and "Front
Height" can be set to "Large".
• When "Surround" is set to "None", "Surround Back" and "Front
Height" can automatically set to "None".
S.Back : Set the presence, size and number of surround back speakers.
• Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when the surround back speakers are not connected.
• 2sp : Use two surround back speakers.
• 1sp : Use only one surround back speaker. When you select this setting,
connect the surround back speaker to the left (L) channel.
Even when the "S.Back" setting is other than "None", sound may
not be emitted from the surround back speaker, depending on the
playback source. In this case, make "Surround Parameter" – "S.Back"
setting other than "OFF" (vpage 45).
NOTE
When the "Amp Assign" setting (vpage 49) is other than "Normal", you
cannot make the "S.Back" setting.
Front Height : Set the presence and size of the front height speakers.
• Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when the front height speakers are not connected.
NOTE
When the "Amp Assign" setting (vpage 49) is other than "Front Height",
you cannot make the "Front Height" setting.
Confirm the setting
ENGLISH
Manual Setup
Setting details
49
Return to previous menu