Idiomas disponibles
Idiomas disponibles
7 The pump must only be used with
cleaning liquids, whose affect on the
materials is not damaging.
8 Hoses must be conductive (electrostat-
ically) (resistance R < 10
Use only original parts.
9 Please follow the national rules and
regulations of the respective country.
Safety Devices
Safety devices serve to protect the user
and must not be rendered in operational or
their functions bypassed.
Power switch
The switch prevents unintented starting of
the appliance. Stop the appliance during
breaks or after operation.
Hand wheel of hand spray gun
The hand wheel on the hand spray gun in
zero position prevents the appliance from
being switched on unintentionally.
Overflow valve
– While reducing the water supply/quanti-
ty regulation at the pump head, the
overflow valve opens and part of the
water flows back to the pump suck side.
– If the hand spray gun is closed, the wa-
ter will flow into the swimmer container
via the overflow valve. This will create a
water circuit.
– If the hand spray gun is opened, the
overflow will close. The spray pressure
will be reactivated.
The overflow valve is set by the manufac-
turer and sealed. Setting only by customer
service.
Safety valve
– With excessive pressure, the safety
valve will open. The emitted cleaning
liquid protects the pump and the high-
pressure hoses from damages by ex-
cessive pressure.
The safety valve is set by the manufacturer
and sealed. Setting only by customer ser-
vice.
Ohm).
6
– 3
EN
Parking brake
The parking brake prevents the appliance
from rolling off.
Start up
DANGER
Risk of injury! Device, tubes, high pressure
hose and connections must be in faultless
condition. If they are not in a perfect state
then the appliance must not be used.
Lock parking brake.
Check oil level
Cut off tip of oil filling nozzle.
Check oil level of the high pressure
pump.
The oil level must be between the "MIN"
and "MAX" markings on the oil container.
Add oil if required (see technical speci-
fications).
ATTENTION
Risk of damage! In case of lacteous oil inform
Kärcher customer service immediately.
Installing the pushing handle
Install the pushing handle on the pipe
frame.
Attaching the Accessories
Connect high pressure hose and spray
pipe to the hand spray gun.
Screw the exchange nozzle onto the
spray pipe.
1 Round jet nozzle
2 Lock screw
3 Power nozzle
4 Union joint
17
