Idiomas disponibles
Idiomas disponibles
USER AND INSTALLATION MANUAL
2. SAFETY INSTRUCTIONS
To prevent injury to the user, other people, or property damage, the following instructions must be followed.
Incorrect operation due to ignoring of instructions may cause harm or damage.
Install the unit only when it complies with local regulations, by-laws and standards. Check the main voltage
and frequency. This unit is only suitable for earthed sockets, connection voltage 220 – 240 V ~ / 50Hz.
The following safety precautions should always be taken into account:
• Be sure to read the following WARNING before installing the unit.
• Be sure to observe the cautions specified here as they include important items related to safety.
• After reading these instructions, be sure to keep it in a handy place for future reference.
Do not install the unit yourself.
Incorrect installation could cause injury due to fire, electric shock, the unit falling or leakage of water. Consult
the dealer from whom you purchased the unit or a specialized installer.
Install the unit securely in a place.
When insufficiently installed, the unit could fall causing injury. When installing the unit in a small room, please
take measures (like sufficient ventilation) to prevent the asphyxia caused by the leakage of refrigerant.
Use the specified electrical wires and attach the wires firmly to the terminal board (connection in such a
way that the stress of the wires is not applied to the sections).
Incorrect connection and fixing could cause a fire.
Be sure to use the provided or specified parts for the installation work.
The use of defective parts could cause an injury due to possible fire, electric shocks, the unit falling etc.
Perform the installation securely and please refer to the installation instructions.
Incorrect installation could cause an injury due to possible fire, electric shocks, the unit falling, leakage of
water, etc.
Perform electrical work according to the installation manual and be sure to use a dedicated section.
If the capacity of the power circuit is insufficient or there is an incomplete electrical circuit, it could result in
a fire or an electric shock.
The unit must always have an earthed connection.
If the power supply is not earthed, you may not connect the unit. Never use an extension cable to connect
the unit to the electric power supply.
If there is no suitable, earthed wall socket available, have one installed by a recognized electrician.
Do not move/repair the unit yourself. Before proceeding with any maintenance, service or repair work, the
product must be isolated from the mains electrical supply. Only qualified personnel should carry out these
tasks. Improper movement or repair on the unit could lead to water leakage, electrical shock, injury or fire.
Do not install the unit in a place where there is a chance of flammable gas leaks.
If there is a gas leak and gas accumulates in the area surrounding the unit, it could
cause an explosion. Perform the drainage/piping work according to the installation
instruction. If there is a defect in the drainage/piping work, water could leak from the unit and household
goods could get wet and be damaged.
Do not clean the unit when the power is 'ON'.
Always shut 'OFF' the power when cleaning or servicing the unit. If not, it could cause an injury due to the
high speed running fan or an electrical shock.
Do not continue to run the unit when there is something wrong or there is a strange smell.
The power supply needs to be shut 'OFF' to stop the unit; otherwise this may cause an electrical shock or fire.
Do not put your fingers or others into the fan, or evaporator.
The ventilator runs at high speed, it could cause serious injury.
28
SWIMMING POOL HEAT PUMP/ SPA NEO
