Idiomas disponibles
Idiomas disponibles
Wi-Fi connection
Setting up the Wi-Fi connection for the first time
1
Download and install the Philips "Air+" app from the App Store or Google Play�
2
Put the plug of the air purifier in the power socket and touch
purifier.
The Wi-Fi indicator
»
3
Make sure that your smartphone or tablet is successfully connected to your Wi-Fi
network.
4
Launch the "Air+" app and click on "Connect a New Device" or press the "+" button on the top of
the screen. Follow the onscreen instructions to connect the air purifier to your network.
Note:
•
This instruction is only valid when the air purifier is being set up for the first time. If the network has
changed or the setup needs to be performed again, see Chapter "Reset the Wi-Fi connection" on
page 8�
•
If you want to connect more than one air purifier to your smartphone or tablet, you have to do this
one by one.
•
Make sure that the distance between your smartphone or tablet and the air purifier is less than 10 m
without any obstructions.
Reset the Wi-Fi connection
Note:
Reset the Wi-Fi connection when your default network has changed.
•
1
Put the plug of the air purifier in the power socket and touch
2
Touch and hold
for 3 seconds until you hear a beep.
The air purifier goes to pairing mode.
»
The Wi-Fi indicator
»
3
Follow the steps 3-4 in "Setting up the Wi-Fi connection for the first time" section.
EN
8
blinks orange for the first time.
blinks orange.
to turn on the air
to turn on the air purifier.
