Idiomas disponibles
Idiomas disponibles
IMPORTANT NOTE:
In use process, if the discovery power line damage, does not allow to repair voluntarily, in order to avoid has the
accident, but must carries on the Technical Service or Qualified Technician.
COMPONENTS:
1. Front guard
2. Blade nut
3. Blade
4. Guard nut
5. Rear guard
6. Crankshaft
7. Motor
8. Oscination knob
9. Pitching knob
10. Fan Body
11. Screw fixer for fan body
12. Power line
13. Adjustable pole
14. Cover for Adjustable pole
15. Master tube
16. Base
ATTENTION:
1.
Fan must be operated at rating voltage.
2.
Only after assembling, can the fan be plugged in.
3.
Nothing can be inserted into the fan that is working.
4.
Unplug the fan before disassembling or cleaning.
INSTALLATION
1.
Installation of the base: Join the two rails.
2.
Installation of the master tube and the base: Put the tube on top of the base, and then fasten the screws. Put
the ornament plastic to cover the screws.
3.
Installation of the fan: set the fan in the adjustable pole, and fasten the fan.
4.
Installation of the rear guard: unscrew the blade nut and the guard nut, and fix the rear guard. After that, put
back the rear guard, and fasten the guard nut.
5.
Installation of the blade: to set the blade into the crankshaft, insert the blade from its back notch into the
spacer pin of the motor, then fasten the blade nut anticlockwise.
6.
Installation of the front guard: pinch the clip of the rear guard, and attach the front guard to the rear guard,
then release the clip.
OPERATION:
1.
Press the buttons below to turn on or off the fan and to switch the fanning speed:0-stop, 1-low speed, 2-
medium speed, 3-high speed.
2.
Oscillation: To control the Oscillation, press or lift the Oscillation knob.
3.
Pitching: To control the pitching, first unscrew the pitching knob, and adjust the fan to the desired angle, then
screw the knob.
-7-
ENGLISH
