Idiomas disponibles
Idiomas disponibles
OPERATING TIPS
◾
Hold and guide the edger so that the
blade is vertical.
◾
Operate at no faster than a normal
walking pace.
◾
Cut at a steady pace. If the blade
begins to bog down, you are edging
too quickly; slow your pace.
◾
Do not force the blade into the
ground. Light contact of the blade against the sidewalk edge, curb, etc., is
acceptable and will not damage the edger.
◾
Always walk forward when cutting and move the edger forward. Do not pull the
edger towards you.
◾
Use the sight line to line the blade up with the edge of the bed (Fig. 11).
◾
Best appearance is obtained when grass is dry. Avoid edging in wet soil or wet
grass areas, otherwise the blade guard might get clogged and result in an uneven
edge. If the blade guard becomes clogged, stop the motor, remove the battery
pack, and remove debris from the blade guard.
56V LITHIUM-ION COMMERCIAL 8" CURVED SHAFT EDGER — EDX2000-C/EDX2000-C-FC
11
Sight Line
23
