Idiomas disponibles
Idiomas disponibles
3. Move the guide wheel, along the
depth-adjusting guide bar, up to
increase the depth of cut or down to
decrease the depth (Fig. 4).
The correct depth of cut depends on the
unevenness of the ground, your height,
and the way you hold the edger. Follow
these steps:
4. Adjust the guide wheel so that the
blade just touches the ground or
breaks the surface of the soil
(Fig. 5).
5. Tighten the depth-adjusting knob
CLOCKWISE securely.
6. Standing in the normal working
position, check the depth of cut
again and correct it if necessary.
ATTACHING/DETACHING
BATTERY
NOTE: Fully charge battery pack before first use.
To Attach (Fig. 6)
Align the battery ribs with the mounting
slots in the machine's battery port and
slide the battery pack until it snaps into
position.
18
56V LITHIUM-ION COMMERCIAL 8" CURVED SHAFT EDGER — EDX2000-C/EDX2000-C-FC
4
To Increase Depth
To Decrease Depth
Depth-adjusting Guide Bar
5
6
Mounting Slot
Guide
Wheel
Blade
Rib
