Idiomas disponibles
Idiomas disponibles
3. Position the slant of the handle upward towards the rear handle. Push the handle
onto the shaft within the mounting zone as shown in Fig. 2b.
4. Insert the clamp block into the handle slot (Fig. 2c), mount the lock lever and
tighten the wing nut. (Fig. 2d).
5. Pull the lock lever up to move/rotate the handle to a comfortable operating
position within the mounting zone, as shown in Fig. 2e.
6. Fold the lock lever to secure the handle in place (Fig. 2f).
2a
Lock Lever
Front Handle
Clamp
Block
Wing Nut
2c
2e
Mounting Zone
16
56V LITHIUM-ION COMMERCIAL 8" CURVED SHAFT EDGER — EDX2000-C/EDX2000-C-FC
Clamp Block
a
b
2b
2d
2f
