Idiomas disponibles
Idiomas disponibles
ASSEMBLY
WARNING:
until the parts are replaced. Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING:
recommended for use with this edger. Any such alteration or modification is misuse and
could result in a hazardous condition leading to possibly serious personal injury.
WARNING:
the factory so that the arrow on the blade guard and the open side point away from
the operator. This ensures that cuttings and other debris are directed away from the
machine and the operator.
UNPACKING
This product requires assembly.
◾
Carefully remove the product and any accessories from the box.
◾
Inspect the machine carefully to make sure that no breakage or damage occurred
during shipping.
◾
Do not discard the packing material until you have carefully inspected and
satisfactorily operated the machine.
◾
If any parts are damaged or missing, please return the product to the place of purchase.
PACKING LIST
PART NAME
Edger
Front handle
Multi-function wrench
Operator's manual
MOUNTING AND ADJUSTING THE FRONT HANDLE
1. Stop the motor and remove the battery pack.
2. Loosen the wing nut and remove it with the lock lever and clamp block from the
front handle (Fig. 2a).
56V LITHIUM-ION COMMERCIAL 8" CURVED SHAFT EDGER — EDX2000-C/EDX2000-C-FC
If any parts are damaged or missing, do not operate this product
Do not attempt to modify this product or create accessories not
Do not adjust the blade guard. The blade guard has been set at
QUANTITY
1
1
1
1
15
