Parkside PWS 20 C2 Traduccion Del Manual De Instrucciones Originale página 23

1. Fine dust filter bag made of fleece
(optionally available see "Replacement
parts/Accessories"), which is used in
stead of the paper filter bag (12) in-
cluded in the scope of delivery.
Wet suctioning
For wet suctioning, always attach
the water tank (
1. For wet suctioning, place the foam
filter (11) onto the filter basket (4a). To
prevent the foam filter (11) from tear-
ing,
­ Only insert dry filters;
- Before inserting, twist the edge
of the filter slightly and then roll it
back.
2. Suctioning up (draining): Place the suc-
tion hose (16) on the handle part (15)
into the water tank and suction up the
water.
3. Empty the dirt container immediately
after vacuuming, as it is not designed
to store liquids (see "Cleaning/Mainte-
nance").
Never reach into the water to
be suctioned up. Danger of
electric shock.
When the container (7) is full, the
suction opening is shut off by a
float, and suction is then cut off.
Switch the device off, remove the
water tank (
tor head (4) and empty the con-
tainer (7). Afterwards, make sure to
re-assemble the device completely.
If the container is full, a float closes
the suction opening and the suction
process is interrupted.
19).
19) and the mo-
1. Turn off the device.
2. Empty the container (7) by
- removing the water tank (
and the motor head (4) and tipping
out the container (7),
or
- opening the drain plug (26) and let-
ting the container (7) run empty.
draining in this way, make
sure that no liquids remain in
the device. Tip the contain-
er (7) slightly when only a small
amount of liquid runs out.
Afterwards, make sure to re-assemble the
device completely.
If foam or liquid exits, switch off the
machine immediately.
Carpet cleaning
For carpet cleaning, only use the
washer nozzle with the attachment
for hard surfaces (
washer nozzle for cleaning uphol-
stery ( 23).
1. Place the foam filter (11) onto the filter
basket (4a). To prevent the foam fil-
ter (11) from tearing,
­ Only insert dry filters;
- Before inserting, twist the edge
of the filter slightly and then roll it
back.
2. Fill the water tank (
water (max. 4 l). Pay attention to the
markings on the container (
3. Pull (do not push!) the nozzle
( 23/24) in rows over the carpet/
upholstery.
Overlap the rows a bit to ensure thor-
ough cleaning.
GB MT
19)
24) or the
19) with fresh
19).
23