Idiomas disponibles
Idiomas disponibles
5.4.2 Watt mode
1.
Press the "-" or "+" key.
2.
The pre-set "2000" watt level is selected and the device turns on.
3.
Use the - / + keys to change the setting in a range from 500 – 3500.
5.4.3 Temperature Mode
1.
Press the "Lock/Function" key.
2.
The preset temperature of 80 °C appears in the display, and the unit starts to work.
3.
Use the + / - selector buttons to change the setting in the range of 60 – 240 °C.
(Temperature levels: 60, 70, 80, 90, 100, 120, 140, 160, 180, 200, 220 and 240 °C)
5.4.4 Power sharing
If both induction fi elds are operated, then the performance of the cooking zones will be
shared as follows. This applies to watt levels 1200, 1500, 1700, 1800, 2000 and 2300.
left / right
500 W 1200 W 1500 W 1700 W 1800 W 2000 W 2300 W 3000 W 3200 W 3500 W
max. right / left 2300 W 2300 W 2000 W 1800 W 1700 W 1500 W 1200 W
max. Total
2800 W 3500 W 3500 W 3500 W 3500 W 3500 W 3500 W
power (W)
PLEASE NOTE
Alternatively swipe your fi nger over the slider to increase or reduce the watt level or
temperature.
You can work in either the watt or the temperature mode.
The temperature is measured by a sensor below plate, therefore the displayed tem-
perature can deviate from the temperature in the pot.
In case of grilling or cooking deep fry food we would advise you to use the function
"Temperature" as in this case you can use temperatures up to 240 °C.
5.4.5 Timer
You can set the unit to switch off automatically after the desired time. The timer can be
set from 1 minute to 24 hours.
1.
Press the "Timer" button while the unit is operating.
2.
The display shows "00:00".
3.
With the +/- keys, you can now select the operating time in 00:01 – 24:00. Press the
key for short time to set the time in 1-minute intervals. If you hold down the + or -
key for a little bit long time, the time runs faster -10 minutes interval.
- - - -
- - - -
CASO DuoChef 3500
DE
EN
FR
IT
ES
NL
- - - -
37
