Idiomas disponibles
Idiomas disponibles
DE
4.3 Control Panel
EN
FR
IT
ES
NL
Display: Displays the current setting
3
(duration of the timer, temperature,
Wattage)
Slide Control: Reduce / increase tem-
4
perature (temperature mode) and
wattage (watt mode) by swiping with
your fi nger.
- / +: Reduction / increase of time (ti-
5
mer function), temperature (tempera-
ture mode) and wattage (watt mode)
4.4
Details on the device
This instruction and when "H" is displayed, is to warn that the induction hob
may still be hot. Although the induction cooker itself does not generate any
heat during the cooking process, the temperature of the cooking utensil
does heat the hob!
ATTENTION
Adhere to the following safety instructions in order to avoid being burnt by the hot
appliance: Risk of burning due to hot surface!
Do not touch the surface of the induction hob while it is still hot ("H" is displayed)
Do not place any objects on the hot induction hob.
4.4.1 Overheating Protection Facility
The appliance is equipped with an overheating protection facility. If the temperature of
the appliance exceeds the critical limit the appropriate error message "E2" is displayed. For
safety reasons the appliance shuts off further power supply. After the cooling phase, the
unit can be switched on again. „E2" also means that the sensor is damaged.
PLEASE NOTE
You will fi nd more detailed information on error messages in the chapter entitled
„Fault indications".
34
CASO DuoChef 3500
3
4
5
Timer: Activate timer function
6
Lock/Function:
7
- Press for a few seconds to activate /
deactivate the panel lock
- Briefl y press to activate / deactivate
the temperature mode.
Pause: Pause cooking
8
On/Standby: Switch on the unit / set
9
the unit to standby mode (this button
is located on the left control panel).
6
7
8
9
