Idiomas disponibles
Idiomas disponibles
INSTRUCTION FOR INSTALLING THE FAN
WARNING: BE SURE DISCONECT THE FAN OFF ELECTRIC SUPPLY BFORE
INSTALLATION. THE IMPORTANT SAFEGUARDS AND INSTRUCTION APPEARING IN THIS
MANUAL ARE NOT MEANT TO COVER ALL POSSIBLE CONDITIONS AND SITUATION
THAT MAY OCCUR. IT MUST BE UNDERSTOOD THAT COMMON SENSE. CAUTION AND
CARE ARE FACTORS THAT MUST BE SUPPLIED BY THE PERSON(S) CARING FOR AND
OPERATING THE UNIT.
NO RESPONSIBILITY WILL BE ACCEPTED FOR ANY DAMAGE WHICH MAY OCCUR
DURING TRANSPORT OR BY IMPROPER INSTALLATION OR VOLTAGE FLUCTUATION OR
IF ANY PORTION OF THE PRODCT HAS BEEN ALTERED OR MODIFIED.
CAUTION
1. Improper installation may result in the risk of fire, electric shock, or injury to persons.
2. To prevent risk of fire and electric shock, do not use the unit near windows.
3. Power plug must be removed from power sock before cleaning, servicing, maintenance and
move from one location to another.
4. The fan should be placed on a flat and stable surface when operating to avoid overturning.
5. The fan should not be placed in a damp place or where humidity is high (such as in a
bathroom).
PARTS
1. FRONT GUARD
2. SPINNER
3. BLADE
4. GUARD MOUNTING NUT
5. REAR GUARD
6. MOTOR HOUSING
7. OSCILLATION KNOB
8. STAND
9. SPEED SWITCH
10. BASE
ASSEMBLY
1. Loosen guard mounting nut from the motor housing.
2. Position rear guard firmly to motor housing and then fasten by turning guard mounting nut
clockwise tightly.
3. Push the blade along motor shaft, fasten it firmly with spinner by turning counter clockwise.
4. Hang the front guard to rear guard with the position fixer provided at the rim of guard and
then fix together with clips provided.
OSCILLATION CONTROL
1. Push the oscillation knob to oscillate.
2. Pull the oscillation knob to stop.
- 9 -
ENGLISH
