ViewSonic ViewBoard VS18189 Guia Del Usuario página 4

7. If the ViewBoard® Cast Button has been paired, and you
would like to pair it with another IFP/CDE device, please
click the "Pairing-Switch Button" at the bottom right
corner (Figure 5) and re-enter the network information
to re-pair the ViewBoard® Cast Button (Figure 6). After
the ViewBoard® Cast Button is re-paired, please remove
it and plug it in again to start sharing.
ViewBoard IFP/CDE Pairing
You can also plug-in the ViewBoard® Cast Button into IFP/
CDE device(s) to pair if the IFP/CDE device(s) is connected to
a LAN (Ethernet cable).
For VB-WPS-001:
1. Attach the USB Type C to USB Type A adapter to the VB-
WPS-001 ViewBoard® Cast Button (Figure 7).
2. Then plug the ViewBoard® Cast Button into the IFP/CDE
device's USB port for pairing.
NOTE:ﾠ The USB Type C to USB Type A adapter is for
optional IFP/CDE device pairing only.
Figure 5
Figure 7
Figure 6
4