Epson TM-T70 Manual Del Usuario página 6

Interface other than Serial (DIP switch 2)
SW
2-1
2-2
2-3
2-4
2-5
2-6 2-7
2-8
Table A
Print density/low power
Print density (Standard)
58 mm paper width model:
Print density (Standard)
80 mm paper width model:
Low power consumption
mode
Print density (Darker than
standard)
Print density (Dark)
vi
Function
Handshaking
(BUSY condition)
Reserved (Do not
change)
Selects print density/
Low power
comsumption mode
[When TM-T88IV-
compatible mode is
enabled]
Setting the conditions
that cancels the
receive buffer BUSY
state (This function is
effective when the
receive buffer
capacity is set to 4KB.
[When TM-T88IV-
compatible mode is
disabled]
Reserved
Reserved (Do not
change)
I/F pin 31 reset
(Do not change)
ON
Receives buffer full
–
See Table A.
Cancels the BUSY state
when the remaining
capacity of the receive
buffer reaches 138
bytes.
–
–
Fixed to ON
SW 3
OFF
ON
ON
OFF
OFF
Offline or receives
buffer full
Fixed to OFF
Cancels the BUSY state
when the remaining
capacity of the receive
buffer reaches 256
bytes.
–
Fixed to OFF
–
SW 4
OFF
ON
OFF
ON