Idiomas disponibles
Idiomas disponibles
English
Once the water and electrical connections have been
made, proceed to start up the machine.
Open the mains water supply tap (A).
Close the protection switch (D).
Set the machine power button (12) to position "1".
Switch the machine on by pressing button T3 in IDLE OFF.
The auto-levelling device comes into operation so that the
water reaches a normal level in the boiler.
Then wait until the machine has reached operating
pressure, 0.9 - 1.2 bar, checking the boiler pressure on the
gauge (4a).
Then check the pump pressure on the gauge (4b). To do
so, insert a brew group with a filter holder filled up with
correctly ground coffee, measured and tamped down, to
obtain the real brewing pressure of 8/9 bar.
The machine is now ready for use.
Do not open the hot
water supply knob (8)
before
the
reached
operating pressure (0.9 -
1.2 bar) as displayed on
the gauge (4a).
For technical adjustments
refer
to
manual.
66
boiler
has
the
correct
the
technical
6.1
Coffee filters supplied
Single shot and double shot filters are supplied with the
machine.
1 Cup
2 Cups
