Sony CMT-T1 Manual De Instrucciones página 12

Idiomas disponibles

Idiomas disponibles

Chapter 4:
the Tape
Player
Playing a Tape
Recording a CD
Automatically
Recording a CD, etc.,
Manually
Recording a CD in a
Specified Track Order
(programme edit)
EN
12
Chapter 4: the Tape Player
Playing a Tape
You can use TYPE I (normal), TYPE II
(CrO
) and TYPE IV (metal) tapes. When
2
you insert a tape, the deck detects the tape
type automatically.
Tuner CD player
1
Stereo cassette deck
2
1
Press POWER.
2
Press 6 EJECT to open the tape
compartment and insert a recorded
tape.
3
Press ( to play the front side.
To play the reverse side, press 9.
4
Press VOL +/– to adjust the volume.
To stop play
Press p.
Operation
To
Press P on the deck. To
Pause
resume play, press here
again.
During play, press 0 or
Find the
) on the deck.
beginning of
the current or
succeeding
track
During stop, press 0 or
Fast forward or
) on the deck.
rewind
Slide DIRECTION to A.
Play one side of
the tape
Slide DIRECTION to a.
Play both sides
repeatedly*
* The deck stops automatically after repeating
the sequence five times.
When listening to a tape recorded with
the Dolby* B-type noise reduction
system
Slide the DOLBY NR switch to ON.
Dolby noise reduction system reduces tape
hiss noise in low-level high-frequency signals.
* Dolby noise reduction manufactured
under license from Dolby Laboratories
Licensing Corporation.
"DOLBY" and double-D symbol a are
trademarks of Dolby Laboratories Licensing
Corporation.
One Touch Play feature
4
Press ( or 9 when the power is off or you
are listening to another source.
As long as a tape is in the deck, you will
immediately be able to listen to the tape
without pressing any other buttons. If a tape
3
is not in the deck, only the power will be
turned on.
p
Recording a CD
Automatically
You can record a CD on a tape quickly by
using the CD SYNC button. Use the
buttons on the CD player and the cassette
deck. Before recording, make sure the tabs
on the cassette have not been removed.
Tuner CD player
1
Stereo cassette deck
3
1
Press POWER.
2
Press 6 and place a CD.
3
Press 6 EJECT and insert a blank tape.
p
2
6
p
7
4
5
loading