SAFETY
BRAKES
WARNING:
brakes when the stroller is not
being pushed so that the stroller
will not roll away. NEVER leave
stroller unattended on a hill or
incline as the stroller may slide
down the hill.
10)
• To engage brakes, apply downward pressure to
the rear of the brakes (Fig. 10a).
NOTE: Check that the stroller will not move
once the brakes are properly applied.
• To release, apply downward pressure to the front
of the brakes (Fig. 10b).
11
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Always set
Fig. 10a
Fig. 10b
TO SECURE THE CHILD
WARNING:
Avoid serious
injury from falling or sliding out.
Always use the safety harness.
STRANGULATION
HAZARD:
Child can strangle
in loose straps. Never leave child
in seat when straps are loose or
undone.
Type 1
11)
• The shoulder straps of the 5-point harness have 3
attachment positions. Select the position that places
the shoulder strap level with, or below the top of
the child's shoulder (Fig. 11a). To adjust harness
height unhook the shoulder strap from the crotch
buckle. Feed the shoulder strap through the harness
spread slots. You can access these slots from the rear
of the seat underneath the fabric. Feed shoulder
strap through the appropriate slot and reattach the
shoulder strap to the crotch buckle.
• Carefully place the child in the stroller seat and bring
the safety harness around the child's waist and over
the child's shoulders. Place the crotch strap between
the child's legs. Insert the male end of each shoulder/
waist belt into the buckle on the crotch strap. Tighten
the harness so it is snug around the child's waist and
over the child's shoulders (Fig. 11b).
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
SAFETY
Fig. 11a
Type 1 Buckle
Adjust for a snug fit
Fig. 11b
12