Idiomas disponibles
Idiomas disponibles
ASSEMBLY
IMPORTANT!
To ensure safe operation of your stroller,
please follow these instructions carefully. Please keep these
instructions for future reference.
IMPORTANT!
Before assembly and each use, inspect
this product for damaged hardware, loose joints, missing parts
or sharp edges. NEVER use if any parts are missing or broken.
IMPORTANT!
Adult assembly is required. Keep child
away during unpacking and assembly.
Remove stroller from box. The front and rear
wheels MUST be installed prior to use.
FRONT WHEELS
To attach the front wheels, unfold stroller as described
in the following section:
1)
• Unlock the fold latch (Fig. 1a) and unfold stroller
frame by pulling upward on the stroller handle
until the frame locks (Fig. 1b).
• Lean the stroller backwards. The front wheels
must be facing backward to align the slot on the
front wheel housing (Fig. 1c).
Push in the pin while inserting the front wheel
until it locks into place (Fig. 1d).
NOTE: Pull on the wheel assembly to ensure that it
is securely attached to the stroller.
Align
Fig. 1c
3
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
REAR WHEELS
2)
• Attach the rear wheels onto the stroller
BASKET
Fig. 1a
3)
• Insert the male ends of the rear basket
•
Fig. 1b
• Detach the basket by pushing the button
Fig. 1d
frame until it clicks into place (Fig. 2).
NOTE: Pull on the rear wheel assembly
to ensure that it is securely attached to
the stroller.
The rear basket needs to be installed prior
to use.
Pull the basket fabric under the bar
before installing.
frame into the female slots on the stroller
frame until it locks into place (Fig. 3a).
Always required: Secure the shorter straps
with D-Rings around the bar underneath
the rear axle as shown in (Fig. 3b). Thread
each strap completely through the D-ring
opening to create a loop. Ensure straps are
secure to the bar before using the stroller.
on each sides of the stroller frame and pull
the basket out (Fig. 3c).
NOTE: Soft goods can be removed by
sliding the fabric from the tube of the rear
basket and removing the D-rings.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
ASSEMBLY
Fig. 2
Fig. 3a
Fig. 3b
Fig. 3c
4
