Idiomas disponibles
Idiomas disponibles
GETTING STARTED
When you first receive your safe you will
need to open the drawer with the key and
remove the drawer in order to install the
batteries. Batteries are included and are
located inside the drawer.
NOTE: This key has also been provided if the
batteries run low. If you lose your key, you may
purchase a replacement key by referencing the
serial number located on the front of the drawer.
See section regarding replacement keys for
further information.
To open the safe, insert key into lock and
turn clockwise until the drawer
automatically opens. NOTE: You must turn
the key back to the locked position before
you are able to close and lock the drawer.
All manuals and user guides at all-guides.com
REMOVING THE DRAWER
REMOVING THE DRAWER
Remove the foam drawer liner. Pull the drawer
all the way open. Locate the access hole.
Using a small screwdriver or pointed tool,
move the tab to the left and pull the drawer
off the slide as shown.
NOTE: You can also access the tab by reaching
under the drawer and moving the tab with your
finger. If the safe has been mounted to a
permanent shelf, you will have to remove the
drawer as described above.
2
14
40790-1803
